200GPD Commercial Reverse Osmosis Water System
If the well water has hydrogen sulfide as a reaction of Iron, sulfur, manganese present in water, and it is not treated prior to the RO membrane, it can cause problems with slime and build-up on the RO membranes if hydrogen sulfide oxidizes and/or there are sulfur bacteria present. … RO membranes by themselves do not remove odor. You should add iron filter before the Membrane.
- Minimum rejection rate of 95% of TDS
- Operation Temperature: 40F to 104F / Maximum temperature 40C.
- Operating Pressure: 10 PSI to 75 PSI.
- System only to be used on biologically safe water supply
- Double end Booster pump, 3/8″ PE Tube 10 feet, 1/4″ Tube 16 feet, High Pressure Switch, Low-pressure switch, Solenoid Valve, 1/2″ Feed Water Adapter 3/8″ Feed Water Adapter Valve and 1/4″x1/4″ RO Delivery Valve & wrench.
- All filters and Membranes are included
5 Stage 200 GPD Commercial Reverse Osmosis Drinking Water Filter Systems
If the well water has hydrogen sulfide as a reaction of Iron, sulfur, manganese present in water, and it is not treated prior to the RO membrane, it can cause problems with slime and build-up on the RO membranes if hydrogen sulfide oxidizes and/or there are sulfur bacteria present. … RO membranes by themselves do not remove odor. You should add iron filter before the Membrane.
Commercial 5 Stage 200 GPD R.O. Systems
- 1st : 5 Micron 20″ x 2.5″ PP sediment filter
- 2nd : GAC carbon filter 20″ x 2.5″ 20″
- 3rd : 5 Micron 20″ x 2.5″ CTO coconut shell carbon block filter
- 4th : 4th : 2412-300 GPD (2 membranes)
- 5th : 2.5 x 10″ GAC Inline carbon filter
- Filter cartridges should be changed every 2- 3 months.
- This is the whole system, including extensive installation instructions including pictures etc.
- 1st Stage – 5 micron sediment filter 2.5” x 20” – Removes larger particles & suspended matter such as silt, rust, algae, sediment, particles, dirt and cloudiness from water.
Replacement each 2- 3 months
- 2nd Stage – Pre-carbon filtration removes chlorine, pesticides, herbicides, bad taste & odor Gas T33 Coconut shell carbon filter 2.5 inch x 20 inch gives your water sweet taste
Replacement each 2- 3 months
- 3rd Stage- CTO coconut shell filter 2.5inch x 20 inch , removes chlorine taste, bad taste & odor
Replacement each 2- 3 months
- 4th Stage – 2 x membrane TFC 2412-300 GPD, Removes particles down to 1/10,000 of a micron / (which is 98% of impurities including organic and inorganic, chemicals). Replacement each 1 year.
- 5th stage – inline carbon – Polishing Gas post filters for a sweeter taste for the water and removes any taste or odor the water may have picked up while sitting in the tank.
Approx. replacement each 2500 gallon
Item Approx. size: 33″x17″x12″
Coming Soon
Coming Soon
