Aqua SoftPro 400 GPD commercial reverse osmosis water system
Aqua Soft Pro Water Filter If the well water has hydrogen sulfide as a reaction of Iron, sulfur, manganese present in water, and it is not treated prior to the RO membrane, it can cause problems with slime and build-up on the RO membranes if hydrogen sulfide oxidizes and/or there are sulfur bacteria present. … RO membranes by themselves do not remove odor. You should add iron filter before the Membrane.
All required fittings & instruction manuals are included to DIY your own installation.
Normally 5 stage Reverse osmosis system can remove/ reduce the following list of contaminants.
- Minimum rejection rate of 95% of TDS
- Dimensions: 18″L x 10″D x 30″H RO Unit.
- Total Weight: Approx. 68 lbs.
- Operation Temperature: 40F to 104F / Maximum temperature 40C.
- Operating Pressure: 10 PSI to 75 PSI.
- System only to be used on biologically safe water supply.
- Filter cartridges should be changed every 6- 8 months.
- This is the whole system, including extensive installation instructions including pictures etc.
Including the following Accessories:
- Double end Booster pump, 3/8″ PE Tube 10 feet, 1/4″ Tube 16 feet, High Pressure Switch, Low-pressure switch, Solenoid Valve, 1/2″ Feed Water Adapter3/8″ Feed Water Adapter Valve and 1/4″x1/4″ RO Delivery Valve & wrench.
- All filters and Membranes are included
5 STAGE 400 GPD COMMERCIAL REVERSE OSMOSIS DRINKING WATER FILTER SYSTEMS
Commercial 5 Stage 400 GPD R.O. Systems
Aqua Soft Pro Water Filter If the well water has hydrogen sulfide as a reaction of Iron, sulfur, manganese present in water, and it is not treated prior to the RO membrane, it can cause problems with slime and build-up on the RO membranes if hydrogen sulfide oxidizes and/or there are sulfur bacteria present. … RO membranes by themselves do not remove odor. You should add iron filter before the Membrane.
- 1st : 5 Micron 20″ x 2.5″ PP sediment filter
- 2nd : 20″ x 2.5″ 20″ GAC carbon filter
- 3rd : 5 Micron 20″ x 2.5″ CTO coconut shell carbon block filter
- 4th : 2 membranes x 200 GPD Membrane Size 2812-200
- 5th : 2.5 x 10″ GAC Inline carbon filter
1st Stage
- 5 Micron Sediment Filter 2.5″ x 20″ – Removes remove larger particles & suspended matter such as silt, rust, sand, algae, sediment, scale particles, dirt and cloudiness from water.
- Replacement each 6- 8 months
2nd Stage
- Pre-Carbon filtration removes Chlorine, Pesticides, Herbicides, bad taste & odor
- GAC T33 Coconut Shell Carbon Filter 2.5″ x 20″ Gives your water sweet taste.
- Replacement each 6 – 8 months
3rd Stage
- CTO Coconut Shell Carbon Filter 2.5″ x 20″ , Removes Chlorine taste, bad taste & odor.
- Replacement each 6 – 8 months
4thStage
- 2 x 200 GPD Membranes, Removes particles down to 1/10,000 of a micron (which is 98% of impurities including organic and inorganic, chemicals). Replacement each 2 years
5th Stage
- Inline Carbon – Polishing GAC Post filter for a sweeter taste for the water and removes any taste or odor the water may have picked up while sitting in the tank.
- Replacement each 2500 Gallon
- All required fittings & instruction manuals are included to DIY your own installation.
- Normally 5 stage Reverse osmosis system can remove/ reduce the following list of contaminants.
Coming Soon
Coming Soon
